Grown up pasture, wooded acreage and poultry farm ground around Cullman, cleared and made ready to use. From the plateau along US 278 to the coves of Smith Lake, this is home ground for Suttles & Sons.
Cullman sits up on the Brindley Mountain plateau, on the divide between the Tennessee and Black Warrior rivers. A lot of the ground up here is Hartsells type soil: fine sandy loam on top with acid sandstone roughly 20 to 40 inches down. It drains well and it is easy to work, but rock is never far away, and that changes how you plan a culvert, a pad cut or a long driveway. On a ridge you can hit ledge sooner than the plat map lets on.
Leave a field alone on that soil and it does not stay a field. Loblolly and shortleaf pine take over old pastures, with oak, hickory, tulip poplar and blackgum in the older woods. Add privet and briars along the fence rows and a 20 acre place can disappear in ten years. A lot of the land work around here is somebody trying to get that ground back: a family buying acreage toward Vinemont, Good Hope or Holly Pond for a house and a shop, a grower adding poultry houses, or a Smith Lake lot owner who needs a way in.
Loblolly and shortleaf pine on old pasture. Oak, hickory, tulip poplar and blackgum in the older timber. Privet and briars on the fence rows.
Sandy loam drains fast and mulches clean, with sandstone often inside three or four feet. Ridges give up rock, and low spots near the Mulberry Fork stay soft longer.
Homesite and shop pads on county road acreage, poultry house pads and farm roads, chert driveways, and steep access to Smith Lake lots.
Work across Cullman County, including Vinemont, Good Hope, Holly Pond, Colony and Baileyton, and down into Hanceville.
Pine thickets and brush cut back off old fields, with the trees you mark left standing. Debris gets mulched in place, so there is no burn pile to deal with.
Long flat pads for poultry houses, shops and barns. Sandstone close to the surface decides where the cut stops, so we look at that before we quote.
Stone driveways built up off the ground with a crown to shed water, using our own trucks to bring the chert and gravel in.
A road a truck can actually use, down a hillside to a lake lot or back across a long tract to a home site, built to carry loads and shed water.
These are our own trucks, machines and jobs, not stock photos.
White and yellow dump truck tipping a load on a wide red dirt site.
Black dump truck parked on pavement at sunset.
Black dump truck in profile at sunset.
Inside Cullman city limits, the Building Inspections office handles building permits and the Planning Commission handles zoning and subdivisions. The commission’s subdivision authority reaches three miles past the city limits, so splitting acreage just outside town can still land on its desk.
On Smith Lake, Alabama Power owns up to the 510 foot full pool line and holds a flood easement up to 522 feet. Work inside that zone can need a permit from their shoreline office, so call them before anything gets cleared near the water.
Statewide, ADEM’s construction stormwater permit applies once a project disturbs one acre or more, or is part of a larger plan that does. We flag what we know applies to your property when we quote. The permit itself stays with the owner unless we agree otherwise.
We quote every property on its own. Around Cullman, these make the biggest difference.
Five year old pine across a field goes quickly. Twenty year old pine thick enough to shade out the ground takes real machine time.
Sandstone inside a few feet can limit how deep a pad or ditch gets cut, and it changes how a culvert gets bedded.
Chert, gravel and fill dirt are priced partly by the load and partly by how far the truck runs to reach your place.
Steep drives, tight turns and no room to dump a load make Smith Lake jobs slower than an open county road tract.
Cullman is our home base, so nearby jobs are short trips. We also work in Vinemont, Good Hope, Holly Pond, Colony, Baileyton and Crane Hill.
It depends on how thick and how old the growth is, how rocky the ground is, and whether you want it mulched only or made ready to build on. We quote each Cullman property on its own. Text photos and a map pin to (256) 735-3214 for a straight estimate.
On mulching and clearing jobs, debris gets ground up and left on the ground. There are no burn piles. If something has to leave the property, such as spoil from a pad cut, we can haul it off in our own trucks.
Yes. Flag the oaks and pines you want and we work around them. That is a common job on the plateau, where pine has taken over a field but a few big hardwoods are worth saving.
Yes, building pads are part of what we do, including long pads for poultry houses, shops and barns. Your integrator and engineer set the size and grade. We clear, cut, fill and compact to that plan, and rock near the surface is the first thing we look at.
It depends on where you are. Inside city limits, start with Cullman Building Inspections and Planning. Near Smith Lake, talk to Alabama Power's shoreline office. Any project disturbing an acre or more can fall under ADEM's stormwater permit. We flag what we know applies when we quote.
Yes. We install chert and gravel driveways and driveway culverts together. If the pipe sits in the road ditch, the county road department may have a say in the size and placement, so we check before the pipe goes in.
Usually, though it depends on the drive and how much room there is to turn around and dump. Send a photo of the road in and the slope. We will tell you what it takes before anyone unloads a machine.
Usually. Send a few photos of the thickest areas, a shot of your gate or road frontage, and a map pin. If we need to walk it, we will say so.
Land clearing in Cullman, Alabama with Suttles & Sons means one local outfit handling the job from standing brush to a finished way in: clearing, forestry mulching, pad work, driveways, culverts and the trucks to haul material.
We work across Cullman County, including Vinemont, Good Hope, Holly Pond, Colony and Baileyton. See how land clearing, home site prep and chert and gravel hauling jobs get planned.
Every job is quoted on its own after we see photos or the property. Call or text (256) 735-3214 for a free estimate.
Send a few photos, a map pin and what you want the land to do. Kalob will tell you what it takes and how many days it should run before anyone unloads a machine.
Request an estimate
Photos help most. Text them to (256) 735-3214 after you send this.